Background Image

Distribution, Time Code, 1205A / 1205A-MC

Home  /  Products  /  Distribution Amplifiers  /  Distribution, Time Code, 1205A / 1205A-MC

1205A MODULATED IRIG DISTRIBUTION

The ptf 1205A is a 12-channel IRIG amplitude modulated time code distribution amplifier housed in a 1U high, 19″ rack package. The ptf 1205A uses an RF design combining the latest technology in low noise components to minimize input/output delays which are of the order of nano seconds.
The unit uses two stages of input signal buffering to distribute the input signal to 12 separate outputs, and insure maximum isolation between individual output signals.

1205A-MC WITH REMOTE MONITOR AND CONTROL

Building on the success of the 1205A IRIG Distribution amplifier, the1205A-MC provides not only the high performance time code distribution, but enhances this with a full remote monitor and control interface.
With the added monitor and control, a remote user can easily monitor status of each of the inputs/outputs of the unit on either RS232 or Ethernet with Telnet, web browser and SNMP interfaces. Optionally the unit can take two separate inputs into an input switch with either fully automatic or manual control.
For added flexibility, individual outputs can be enabled/disabled via remote control so that unused outputs are isolated from the alarm system.
Input and output status is immediately evident from front panel indicators of each channel. Also auto/manual selection of the auto switched input is available from the front panel key pad.
Two stages of input signal buffering are used to distribute the input signal to 12 separate output channels, and insure maximum isolation between output signals.

1205A

• Input Frequencies 100Hz to 1MHz
• IRIG am Time Code Distribution
• Distributes IRIG A, B, D, E, G, & H
• High Channel Isolation
• 12 Channel Output Distribution
• Remote Monitoring of Input/Output Levels
• Remote Selection of Active Outputs
• Dual Input with Auto Switch Option
• Low Cost
• Convenient 1U, 19" rack mount package

1205A-MC

• IRIG am Time Code Distribution
• Distributes IRIG A, B, D, E, G, & H
• High Channel Isolation
• 12 Channel Output Distribution
• Remote Monitoring of Input/Output Levels
• Remote Selection of Active Outputs
• Dual Input with Auto Switch Option
• Low Cost
• Convenient 1U, 19″ rack mount package

Time Code Outputs (12)
Code Format IRIG A, B, D, E, G and H Modulation Frequency 100 Hz - 1 MHz
Amplitude < 6V p-p 50 ohms Modulation Ratio 3:1
Connectors BNC
Input 6V p-p 50 ohms   Environmental and Physical
Alarm Output Summary alarm (9 pin 'D') Temperature 0 to 50 deg C
Indicators Power(Green LED) Alarm(Red LED) Rel Humidity 0 to 95% non-condensing
1205A-MC Additional Specifications
Ethernet RJ 45 RS232 DB9 Selectable baud rates
Protocols(Ethernet)
Telnet SNMP
Web Browser
For additional specifications, please download the data sheet (under documents tab)

Please select from the documents below:

ptf 1205A
Click on the data sheet download button to access the data sheet
Click on the manual download button to access the manual
ptf 1205A-MC
Click on the data sheet download button to access the data sheet
Click on the manual download button to access the manual